A low operating pressure nanofiltration membrane is prepared by interfacial polymerization between m-phenylenediamine(MPDA) and trimesoyl chloride(TMC) using PVC hollow fiber membrane as supporting.A series of PVC nanofiltration membranes with different molecular weight cutoff(MWCO) can be obtained by controlling preparation conditions.Chemical and morphological characterization of the membrane surface was carried out by FTIR-ATR and SEM.MWCO was characterized by filtration experiments.The preparation conditions were investigated in detail.At the optimized conditions(40 min air-dried time,aqueous phase containing 0.5% MPDA,0.05% SDS and 0.6% acid absorbent,oil phase containing 0.3% TMC,and 1 min reaction time),under 0.3 MPa,water flux of the gained nanofiltration membrane reaches 17.8 L/m2·h,and the rejection rates of methyl orange and MgSO4 are more than 90% and 60%,respectively. 相似文献
Reactions of CuCl2, m-nitrobenzoic acid (HNBA) and NaOH with 2,2′-bipyridine (bpy) or 1,10-phenanthroline (phen) in aqueous ethanol afforded two Cu(II) complexes Cu(bpy)(NBA)2, 1, and [Cu(phen)(H2O)2(NBA)](NBA), 2. The monomolecular Cu(bpy)(NBA)2 moieties are both bridged by hydrogen bonding interactions and interlayer π*–π*stacking interactions to form a 3D (3,4,6)-connected supramolecular architecture with the Schäfli symbol of (44·62)(44·66·85)(63)2. Complex 2 crystallizes in a noncentrosymmetric space group P21 where all molecules show the same orientation along the polar b axis. Preliminary investigations suggest that 2 exhibits ferroelectric hysteresis loops at room temperature with remanent polarization (Pr) of ca. 0.09 μC cm?2 and coercive electric fields of 2.53 kV cm?1, respectively. It may be a potential ferroelectric with a relatively large spontaneous polarization (Ps) of 0.22 μC cm?2. Furthermore, permittivity property measurements reveal a dielectric constant (εr) of 6.36. Variable-temperature (2–300 K) magnetic susceptibility measurements showed the presence of weak ferromagnetic interactions between the Cu(II) ions for both 1 and 2. 相似文献
In-plane vibration is significant to a structure and has been accurately solved by many numerical methods; however, there are still not enough studies on its experimental measurement.
Objective
This work aims to propose a non-contact and fast way to measure dense full-field in-plane vibration of a plate structure, which has high frequencies and low response magnitudes.
Methods
A novel three-dimensional (3D) continuously scanning laser Doppler vibrometer (CSLDV) system that contains three CSLDVs is developed to conduct full-field scanning of a plate with free boundary conditions under sinusoidal excitation to measure its 3D vibrations. Calibration among the three CSLDVs in the 3D CSLDV system based on the geometrical model of its scan mirrors is conducted to adjust their rotational angles to ensure that three laser spots can continuously and synchronously move along the same two-dimensional scan trajectory on the plate. The demodulation method is used to process the measured response to obtain in-plane operating deflection shapes (ODSs) of the plate.
Results
Four in-plane ODSs are obtained in the frequency range of 0–5000 Hz. Modal assurance criterion (MAC) values between in-plane ODSs from 3D CSLDV and step-wise scanning laser Doppler vibrometer (SLDV) measurements are larger than 95%. MAC values between ODSs from 3D CSLDV measurements and corresponding mode shapes from the finite element model of the plate are larger than 91%.
Conclusions
Results from 3D CSLDV measurements have good accuracy compared to those from SLDV measurements and numerical calculation, and the 3D CSLDV system can scan much more measurement points in much less time than the SLDV system.